Description
PW-CCT1080 Composite Corrosion Resistance Test Chamber
Introduction:
Our company offers a salt spray test chamber that is designed to examine the corrosion resistance of products. This is done by subjecting the surfaces of different materials to corrosion treatments such as electroplating, anodizing, spraying, and anti-rust oil.
Specification:
| Model | PW-CCT1080 |
| Internal size | 200x90x60(WxDxH)cm |
| External size | 295X125X172(WxDxH)cm Without temperature and humidity host (W125*D60*H110) |
| Power supply | AC3ø 380V 40A 50HZ |
| Test box interior | It is welded and formed by PP beige, with a thickness of 10mm. The temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time using CASS, ACSS and NSS tests. |
| Thermostatic case | Using PP beige heat-resistant and impact-resistant board, PP board mainly plays the role of protection and beautification. |
| Chamber upper cover | It is formed by PP welding, the thickness is 10mm, and the temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time in the CASS, ACSS, NSS test (automatic opening and closing). |
| Test refill drum | Using PP whiteboard, the capacity is 100L. |
| Test chamber basket frame | Using GRP temperature-resistant angle material, the angle can be 20°±5° from the product test angle, and the testing bracket can be customized. |
| Saturated air drum | Made of SUS#304 stainless steel plate, thickness 2mm, with automatic water level controller to avoid the inconvenience of manual water addition. |
| Safety devices | 1. Low water level protection of the box. Saturator low water level protection. Saturator over-temperature protection. |
| 2. Refrigeration system compressor overheating, overload, overpressure, overtemperature protection. The test chamber has extreme over-temperature protection, automatic pressure balance protection, and bottom protection against water accumulation. | |
| 3. The humidification heat pipe of the humidification system is dry-burning, water shortage is abnormal, and the heating pipe is short-circuited. | |
| 4. Heating system heating tube limit over-temperature, heating tube short circuit protection. | |
| 5. The main power supply is protected from overload, leakage and short circuit, phase losse, and the control circuit is protected from short circuit and overload. Circulating fan overload, short circuit. | |
| 6. With sound and light alarm device. |
Product Advantages
Structural Design and Integration Benefits
The PW-CCT1080 corrosion test chamber is engineered with modular components such as the PP welding upper cover and GRP basket frame, enabling flexible specimen handling and testing adaptability. Its durable SUS#304 stainless steel saturated air drum with automatic water level controllers ensures consistent salt spray generation. The salt spray test machine design incorporates robust safety protections that guard against water shortage, temperature surges, and electrical overloads, supporting extended continuous operation and reducing downtime in high-demand testing environments.
Performance Reliability and Operational Convenience
This salt spray corrosion test chamber offers enhanced performance with automated water level management and audible-visual alarms, minimizing manual intervention and promptly signaling operational anomalies. The ergonomic automatic upper cover facilitates ease of loading and monitoring, improving workflow efficiency. Its precise environmental controls enable highly repeatable corrosion exposure conditions, which are critical for delivering trustworthy data on composite material longevity and coating effectiveness, increasing the device’s value in professional testing settings.
Use Scenarios
Quality Assurance in Composite Coating Manufacturing
Within manufacturing settings that produce coated composites, the corrosion test chamber serves a pivotal role in validating product durability under salt spray conditions. The equipment is integrated into the quality control workflow to routinely assess electroplated, anodized, sprayed, or anti-rust oil-treated surfaces. Its capacity to simulate corrosive environments according to international standards ensures product compliance and reduces field failures. This testing capability supports manufacturers in maintaining stringent quality benchmarks and streamlining defect prevention.
Research and Development for Coating Optimization
In R&D laboratories focusing on corrosion resistance enhancement, this environmental test chamber composite corrosion resistance test chamber enables accelerated aging and corrosion simulation of prototypes and materials. By precisely controlling temperature, humidity, and salt spray concentration, the salt spray test machine facilitates comparative analysis of coating formulations. This data drives formulation improvements and process adjustments. The ergonomic design and automated safety features allow researchers to conduct extended test cycles efficiently, integrating seamlessly into analytical workflows to advance material innovation.
FAQ
What types of composite materials are suitable for testing in the PW-CCT1080?
We designed the composite corrosion resistance test chamber PW-CCT1080 to test composite materials treated with electroplating, anodizing, spraying, and anti-rust oils. This ensures comprehensive assessment of coatings under accelerated salt spray corrosion conditions.
Can the salt spray chamber be configured for specific testing requirements?
Our salt spray corrosion test chamber features a spacious internal design with an adjustable specimen frame. While standard specs cover most needs, we offer customization options to adapt to your specific corrosion resistance testing workflows upon request.
What installation support does PW Instruments provide for the PW-CCT1080?
We provide detailed installation guidelines and technical support to ensure smooth setup of your salt spray test machine. Our team assists with electrical requirements and operational training to help you integrate the chamber efficiently into your testing facility.
How should I maintain the PW-CCT1080 to ensure consistent test results?
Regular maintenance of safety devices, automatic water level systems, and temperature controls is essential. We recommend scheduled inspections to preserve the integrity of your environmental test chamber and to sustain precise simulation of salt spray conditions over long-term use.
