Description
PW-CO150-T3 Precision Oven
I. Product Use
It is widely used for drying and testing polymer materials, die-cutting materials, adhesives, adhesive tapes, films, and other products and semi-finished products at temperatures up to 300 °C, and it can also help users understand the high-temperature resistance characteristics of materials in different temperature ranges. Because it provides stable and accurate temperature control, it ensures reliable test results, so it is widely trusted in material research and quality inspection. But it should be noted that the equipment must be used within the rated temperature range to ensure safety and performance.
II.Box Structure Size
- 1. Inner size: 50*50*60cmW*D*H (various sizes available to order)
- 2. Outside size: 70*80*120cmW*D*H
- 3. The controller is located above the machine, double doors open from the right left.
- 4. The inner material is mirror stainless steel plate 1.0mm thick.
- 5. The external material is SECC steel plate thickness ≥ 1.2mm powder baking paint treatment.
- 6. Insulation material for 100K high-density glass rock wool thick 100mm, good insulation, maximum temperature insulation.
- 7. Divided into two layers inside, stainless steel grating two (mesh-shaped).
- 8. The material of the tightening of the anti-density is high temperature resistant silicone strip.
- 9. No glass window;
- 10. Equipped with movable casters and fixed feet.
III.Parameters and Temperature Control System
- 1. Temperature control is PID microcomputer, can automatically calculate, PV/SV display at the same time, button setting, can set any temperature value between room temperature to the highest temperature (Taiwan Taishong).
- 2. Timer setting, 99.9 seconds -999 hours (can choose to set the hours, minutes, seconds,)
- Continuous use
- temperature to timing, time to cut off the heating current (end alarm device)
- 3. Temperature-sensing into the force CA (K) TYPE temperature-sensing head.
- 4. The output of 3-32V.
- 5. The current controller by the solid state relay control power output, by the temperature control PID microcomputer contact output, the signal automatically adjusts the output ratio, can accurately control the temperature overshoot precision (Taiwan Yang Ming).
- 6. Heating material is stainless steel heater.
- 7. Temperature range RT ~ 300 ℃.
- 8. Temperature rise rate: RT-100 ℃ about 15 minutes.
- 9. Control accuracy: ± 1 ℃.
- 10. Uniformity of temperature distribution in the box: ±4℃ (no-load).
Ⅳ.Air Delivery System
- 1. Forced horizontal air circulation, the air source by the circulation motor operation drive the wind wheel through the electric heater, the hot air from the duct to the oven inside, and will be used after the hot air into the duct into the wind source again circulation heating, thus reducing energy loss and ensure the temperature uniformity in the box, when the door is opened caused by the temperature drop, but also can be used to send air circulation system to quickly return to the working state temperature value.
- 2. The motor is long shaft high temperature resistant type, the power is 1hp/50Hz (Taiwan).
- 3. 5 inch wind wheel for multi-blade turbine wheel type.
- 4. It is equipped with adjustable air guide plate.
- 5. There are air inlets at the back and two sets of air exhausts on the top, with adjustable air exhaust volume.
Ⅴ.Power Supply Unit
220V 50HZ/60HZ
Ⅵ.Security Protection System
- 1. Over-temperature protection system: When the temperature is out of control due to external force, the system will automatically stop the power supply of the whole machine when it exceeds the set temperature by 10 degrees, so as to protect the safety of your products and machines.
- 2. Fuse and overcurrent protection system: When the power of the machine exceeds the normal power due to high voltage or other reasons, the system will automatically power off to protect the industrial control components of the machine from being damaged.
- 3. Motor overheating protection, to prevent motor damage caused by overheating motor, phase sequence protection.
