Description
PW-CMF Series High Temperature Ashing Furnace Test Chamber Equipment For Sale
Use
It is also called muffle furnace, which is widely used in special baking process. It can be used for aging test of electronic components and plastic chemical products, as well as preheating of knives and iron, quenching, burning, stewing, annealing, ashing test, Refining and other high heat treatment tests, etc.
Temperature control system
1. Resolution accuracy ±1℃; 2. The uniformity of distribution in the box is ±5.0℃;
3. Temperature range: room temperature～1000℃ ;
4. Heating time: about 12 minutes at room temperature 100℃;
5. Heater: The heating material is high temperature heating wire;
6. The temperature control is PID microcomputer, which can automatically calculate, PV/SV can be displayed at the same time, and it can be set by pressing keys. Any temperature value between normal temperature and maximum temperature can be set;
7. Timer setting: A, 9.99 seconds-999 hours (you can choose to set hours, minutes, seconds) B. Time when the temperature is up, and the heating current is cut off when the time is up;
8. CA (K) type for temperature sensing input;
9. The current controller is ScR thyristor, with high control accuracy;
10. Heating method: A, thermal radiation convection;
Safety protection system
1. High temperature protection system: When the temperature is out of control due to external forces, the system will automatically stop heating and power supply when the set temperature exceeds 10 degrees, thereby protecting the safety of your products and machines;
2. Over-current protection system: When the power of the whole machine exceeds the normal power due to high external voltage or other reasons, the system will automatically power off to protect the industrial control components of the whole machine from being damaged.
Technical Parameters
2. Outer box size: subject to the actual product;
3. The controller is located under the machine, and the door opens from right to left;
4. The inner material is high temperature resistant ceramic plate;
5. The outer material is SECC steel plate, powder baking varnish, thickness 1.5mm;
6. The insulation material is imported rock wool, and the insulation thickness is 150mm;
7. With movable feet and fixed feet, it can be pushed at will and fixed position;
8. Voltage 380V 9. Power 12KW
Use Scenarios
Aging Testing of Electronic Components in Controlled Laboratory Environments
In the electronics industry, component aging tests simulate long-term exposure to elevated temperatures to verify durability and reliability. The PW-CMF Series high temperature furnace is employed to replicate these conditions with tightly controlled temperature stability up to 1000°C. Its uniform heat distribution ensures consistent sample exposure, preventing thermal gradients that could skew data. Integrated PID control allows precise temperature ramping aligned with standardized testing cycles. This muffle furnace supplier’s equipment seamlessly integrates with laboratory data acquisition systems, facilitating compliance with industry standards and quality assurance protocols essential for electronic device qualification.
Metal Tool Preheating and Annealing in Industrial Workshops
Industrial metalworking shops utilize this high temperature ashing furnacefactory product to preheat tools such as knives and irons before heat treatments like quenching or annealing. The furnace’s rapid and stable heating capability supports controlled microstructural changes critical for mechanical property enhancement. Its safety features protect operators and expensive tools during prolonged high temperature cycles. The medium chamber size and robust construction enable continual use in demanding workshop environments. By integrating with heat treatment scheduling and monitoring systems, the PW-CMF Series improves operational efficiency and product quality assurance within metal fabrication and treatment workflows.
FAQ
What types of materials are suitable for testing in the PW-CMF Series High Temperature Ashing Furnace?
Our high temperature furnace is designed to accommodate various materials including electronic components, plastics, metals, and chemical products. The uniform heat distribution and precise control ensure reliable aging tests, annealing, and ashing processes for diverse industrial applications.
Can you customize the dimensions or specifications of the PW-CMF Series furnace?
We understand industrial demands vary, and while our standard inner chamber is 300mm³, we offer customization options through consultation. Contact us to discuss specific size or feature requirements to meet your manufacturing or testing needs as a trusted muffle furnace supplier.
What safety measures does the PW-CMF furnace incorporate during operation?
Safety is integral to our design. The PW-CMF Series includes over-temperature and over-current protection, automatically cutting power to prevent hazards. This ensures both equipment longevity and sample integrity during intensive heat treatment, supporting safe, uninterrupted workflows.
How is the PW-CMF Series furnace shipped and what installation support do you provide?
As a leading ashing furnace factory, we carefully package the furnace for secure international shipping. Installation instructions accompany each unit, and our support team is available for technical guidance to ensure proper setup and operation at your facility.
