Description
PW-CAT-300 China Factory Automatic Yellowing Resistance Aging Test Chamber Machine For Sale
Use
Manufactured in accordance with ASTM D1148, this machine is used to simulate the ultraviolet radiation and heat of the sun. The specimen is exposed to ultraviolet radiation and temperature in the machine. After a period of time, observe the degree of resistance to yellowing of the specimen. Use the gray mark as a reference to determine the yellowing With complete accessories, it can also be used as an aging tester and oven.
Feature
The aging test box adopts foreign advanced heating airflow method, which solves the congenital defect of the original turntable type temperature unevenness, and greatly improves the safety of sample placement. The effective space utilization rate is more than 200% of the original turntable type, which is suitable for electronics The aging adaptability test of components, rubber parts and other materials under high temperature. The new type of aging test chamber adopts LTDE programmable control system, which can be programmed to increase temperature-constant temperature-standby according to work needs within the rated temperature range. After the operator sets the program, the instrument will work according to the program and automatically shut down after completion (standby).
The instrument has the function of over-temperature automatic power-off protection, dual secondary protection system, to ensure the safety of the instrument and test piece, energy saving and environmental protection is today’s advanced aging test equipment.
SAFETY PROTECTION
1. Power overload and short circuit protection;
2. Safety grounding protection;
3. Temperature over-temperature protection;
4. Time setting protection;
5. Overload protection of blower motor;
6. In order to protect the equipment, all alarms will automatically cut off the power and give out an audible prompt
PRECAUTIONS FOR USE
1. Power overload and short circuit protection;
2. Safety grounding protection;
3. Temperature over-temperature protection;
4. Time setting protection;
5. Overload protection of blower motor;
6. In order to protect the equipment, all alarms will automatically cut off the power and give out an audible prompt
1. Power supply equipment: An overloaded fuse device should be installed in the power supply line for the special case of this box and a good grounding device. 2. Sample preparation: After numbering the samples one by one, place the samples on the sample carousel so that they do not touch or collide with each other. 3. When everything is ready, close the door.
4. Turn off the switches of the control system, plug in the power plug and turn on the power switch dial to automatically rotate, and at the same time the power indicator of the control system is on. If you need to heat up, you must turn on the switch (ie, high temperature switch and low temperature switch), and then adjust the whole Automatic Control System .
5. The case of the instrument must be grounded effectively to ensure safe use.
6. The instrument should be placed in a well-ventilated indoor horizontal position, and no flammable and explosive materials should be placed around it.
7. An iron-clad knife switch should be installed in the power supply line for the special case of this box. Please check the electrical performance of the box before the case is grounded and energized, and pay attention to whether there is an open circuit or leakage. This instrument has no explosion-proof device. , Do not put inflammable and explosive materials to dry.
8. Do not overcrowd the items in the box, and leave space for hot air circulation.
Technical Parameters
| Inner box size | 50×50×60cm |
| Temperature Range | Room temperature +5℃～120℃ |
| Control Method | P.I.D Automatic temperature calculus |
| Temperature Display | 0.1℃ Unit display |
| Temperature control | ±.3℃ |
| Distribution Accuracy | ±1%（1℃） |
| Time setting | 0～999，9hours（minutes）Power failure memory type, with buzzer |
| Rotary speed | Dia.45cm 3R.P.M |
| Heating method | Hot air circulation system |
| UV light source | OSROM UV300W light bulb |
| Standard Accessorias | Double over-temperature protection and 2 sheds |
| Manufacturing Material | Internal SUS#304 stainless steel, external high-grade paint |
| Safety Protection | Independent over-temperature protection, safety overload switch |
| Power Supply | Simplex 220V |
Product Advantages
Structural Design and System Integration Benefits
The aging test chamber manufactureryellowing resistance test chamber supplier system features a robust SUS#304 stainless steel interior optimized for thermal stability and corrosion resistance. The innovative heating airflow system ensures uniform temperature distribution, eliminating hotspots and inconsistencies common with conventional designs. Modular components such as the LTDE programmable controller simplify integration with existing laboratory infrastructure and ease maintenance requirements. The equipment’s compliance with ASTM D1148 affirms its suitability for regulated testing, making it a reliable addition for facilities requiring standardized performance and traceability.
Performance Optimization and Usability Enhancements
Operationally, the PW-CAT-300 excels with precise P.I.D automatic temperature control and a user-friendly interface offering temperature settings in 0.1℃ increments. Its extensive safety measures—including multiple over-temperature protections and automated alarms—reduce downtime and safeguard samples. The large inner chamber facilitates batch testing, boosting throughput without compromising uniformity. Designed for adaptability, this yellowing resistance tester aging chamber factory device supports both aging and oven functions, enhancing laboratory efficiency and providing comprehensive test capabilities under a unified platform.
Use Scenarios
Accelerated Aging Evaluation in Electronics Manufacturing
Within electronics production environments, materials such as plastics, insulators, and coatings require verification of their resistance to ultraviolet-induced deterioration. The PW-CAT-300 uv aging test chamber yellowing resistance tester replicates long-term sunlight exposure combined with controlled heating cycles to predict material behavior in actual service conditions. Its precise temperature regulation and uniform UV distribution ensure reproducible results critical for incoming inspection and end-product qualification. Integration with laboratory information management systems streamlines documentation, making compliance with international quality standards more manageable.
Quality Control of Automotive Components Under Thermal and UV Stress
Automotive parts, particularly rubber seals and coatings, must maintain integrity under fluctuating temperatures and UV exposure during vehicle operation. The PW-CAT-300, as an aging test chamber manufactureryellowing resistance test chamber supplier, enables accelerated simulation of these operational stresses to assess material durability. Its large chamber size accommodates multiple components, facilitating batch processing aligned with production lines. Safety features protect both users and samples throughout extended test cycles, and its programmable controls allow adaptation to diverse automotive standards, supporting robust quality assurance programs in automotive manufacturing facilities.
FAQ
What types of materials can the PW-CAT-300 test for yellowing resistance?
Our yellowing resistance test chamber is designed to evaluate plastics, rubber, coatings, paints, and electronic materials exposed to UV radiation. It simulates sunlight effects precisely to assess durability and color stability, making it suitable for diverse industrial applications requiring aging validation.
Do you offer customization options for the aging test chamber?
We provide flexible programming capabilities via the LTDE control system to customize temperature profiles including ramp-up and standby modes. While the standard unit meets ASTM D1148, we welcome inquiries for specific adaptations to suit your testing needs in our aging test chamber manufactory.
How is the PW-CAT-300 installed and maintained on site?
The chamber requires a stable 220V power supply and should be placed in a well-ventilated laboratory area. Maintenance routines include regular cleaning of the SUS#304 stainless steel interior and inspection of UV bulbs and safety systems. Our support team offers detailed guidance to ensure reliable operation.
What safety measures are included to protect my samples and operators?
We incorporate dual over-temperature protection, motor overload alarms, power overload, and automatic cutoff systems to safeguard both your samples and equipment. These built-in safety features make our yellowing resistance tester highly reliable for repeated and long-term testing cycles under controlled conditions.
